What are the major differences between old SL & AL series Mori Seiki turning...
Pardon my ignorance, but what are the major differences between the 80s Mori Seiki SL-2 and an AL-2 turning centers? I'm new to turning centers and looking to buy an old machine to learn on. I've heard...
View ArticleMAHO MH700C Philips 532
Error Description: PLC program and "user agents" is no longer available The communication between the computer and controller now works with the Sccom program via COM. 1 Here data can be transferred....
View ArticleClik here to view.
DDRT-260 noise
Hello all. Last October, I took the plunge and bought a new Mori Duravertical 5100. Hi-pressure coolant, conveyor, spindle probe and the Mori 4th axis (DDRT-260) Had a few issues getting the shop...
View ArticleStrange problem with Mori Seiki MV40
We have a Mori Seiki MV40 that was purchased used a few years ago and it has been sitting for some time. It has a Yasnac MX-3 controller. We just started using it with some regularity about a year ago....
View ArticleMaho MH600E2 user in need of help.
Hello All , I was shadowing this forum from some time and found lots of answers here to fix my maho MH600E2 with Philips CNC432 control. Below is what is curently done and working: 1) Machine constans...
View ArticleNLX2500/700 celos control turret not clamped
I have a new (bought used Mori nlx 2500) It has rthe Celos control. I pushed the turret check button and the turret unclamped. I have gone through the insturtions I am able to jog the turret but I...
View ArticleClik here to view.
New Machine Day!
Just got power to her. Rotary tooling, Y axis, programmable hydraulic steady rest, sub spindle. New Celos controls. Training starts Monday. Yahooo!:drool5: Mori NLX2500 Attached Thumbnails   Â
View ArticleMori Seiki SH63 HELP
Hello, We bought a used Mori SH 63 HMC and by the time we received the machine there was some damage to the guards that can be fixed. But a mechanism/ dog / cam that controls the pallet changer by...
View ArticleSetting Datums inside a Siemens 840d
Hi I'm running a dmg 5axis Miller programming offline, at the minute were setting Datums each time but a lot of jobs are fixtures so I want to add the datum line inside the program so that it auto sets...
View ArticleMori Seiki MH 50 help
Hello all. I've got our MH 50 in a bind. We just purchased this machine from an auction. It's been problems since it landed on our floor. The sub arm tool changer is giving me grief. I can't get the...
View ArticleMori Seiki SL-0A
Ok guys I just got a call from a guy selling Mori Seiki SL-0A lathe the price is ridiculously low but now I need to go evaluate it and organise transport 700km home lucky I have a week to prepare. So...
View ArticleClik here to view.
mori seiki slbb communications
I am looking at an old mori seiki SL-BB. im not sure on the year, but I believe its between 1978-1980. I think the control is a Yasnac 2000b (I attached a picture of a machine that has a very similar...
View Articlecontroller preference
Can anyone advise what controller is the better choice. Just looking at a new DMG machine and they offer Heidhain 340 or Siemens 840. Any feedback appreciated Thanks
View Article2003 Gildemeister CTX310 questions
Hi, I got my lathe wired up but I'm having some problems getting it to run a program. The control is Fanuc 21i-T which I am not really familiar with. Unfortunately the machine didn't come with any...
View ArticleOld Mori SL-BB parameters
Does anyone have the parameters for an old Mori SL-BB with the Yasnac 2000b control? -Alex
View ArticleDMG/Gildemeister Lathe M codes for live tools
Hey Guys, Now that I finally got my lathe running I was wondering if someone has a list of M codes, specifically for early 2000's Gildemeister lathes with c-axis/live tooling with Fanuc control. If...
View Articlemilling a square using an axial tool
I have a mori sl-403. I want to use an axial tool (perpendicular to z) to mill a hex that is 4" from the end of the part. I know you will use g112 to do the program but am having trouble with figuring...
View ArticleClik here to view.
Just bought a Mori Seiki SL3H
Hey Guys! I need some help as I am completely new to the Mori Seiki world, I would love to learn about these machines as I have been told they are amazingly high quality and accurate machines. The...
View Article1989 MV-40B Spindle Drawbar Clamping Force
I am in the process of changing out my belleville washers on mv-40b, I checked my drawbar pull before disassembly and it was 5.88 kN (~1300lbF). The guys at mori tell me the spec range is 5.88kN -...
View ArticlePostprocessor for Maho700 with phillips 432 CNC controller
HelloI am still new in the field of CNC, and currently I am contributing with more experienced engineers to renew an old maho 700 to be ready again tobe functional. My question is: The normal procedure...
View Article