Error Description:
PLC program and "user agents" is no longer available
The communication between the computer and controller now works with the Sccom program via COM. 1
Here data can be transferred.
The PLC must previously have been in RAM because it had to be ever restored. (According adjuster)
When I try to transfer the software to the IPLC Cast.exe program interrupts the transmission from because the casterr.def file is missing.
If I create this file, breaking the Cast.exe from during transmission.
The following files exist and it should have in the recent restoration works with these:
cast.exe
dload.exe
basiv5.86
cast.def
What's wrong?
Or. what needs to be set on the controller when I cast the computer start the program?
Or is there another way the program iPLC in RAM to install?
Thanks for the support
PLC program and "user agents" is no longer available
The communication between the computer and controller now works with the Sccom program via COM. 1
Here data can be transferred.
The PLC must previously have been in RAM because it had to be ever restored. (According adjuster)
When I try to transfer the software to the IPLC Cast.exe program interrupts the transmission from because the casterr.def file is missing.
If I create this file, breaking the Cast.exe from during transmission.
The following files exist and it should have in the recent restoration works with these:
cast.exe
dload.exe
basiv5.86
cast.def
What's wrong?
Or. what needs to be set on the controller when I cast the computer start the program?
Or is there another way the program iPLC in RAM to install?
Thanks for the support